Rising circular saw with hydraulic clamp and dynamic blade speed and variable feed. Proven design for demanding industrial sawing applications.

The upper part of the machine is designed to keep the controls and cabinetry above and behind the vice allowing for improved visibility and for sharply bent tube to be accomodated easily.

The saw table allows jig fixtures to be attached to directly to the table for clamping complex formed parts. Multiple parts can be cut in a single machine cycle given the correct fixtures.

The 450R can accomodate blade sizes upto 450mm giving a maximum cut depth range to 155mm.

The 450R is fully dynamic; blade feed speed, rotational speed and position can be set via a graphical screen. The cut is dynamically adjusted during the cycle to reduce the feed speed on tube entry and exit (break through) whilst running at the maximum speed allowable for the material for the duration of the cut. This is facilitated by the use of a closed-loop proportional hydraulic control.

A Two handed control activates the clamping mechanism and ensures operator safety. Optionally the machine can be configured with a light curtain system

Features and Benefits:

• Variable Cutting Feed
  The feed rate of the blade is altered dynamically so that entry into and exit from the material by the blade is done at a controlled rate. This results in better quality cuts requiring less deburring and prolongs blade life

• 6" Graphical Screen
  Simplifies setting of the start and end of the blade stroke, blade feed and blade speed settings

• Variable Blade Speed
  The rotational speed of the cutting disc can be finely adjusted tomatch the material. Giving a better quality cuts and longer blade life.

• Table Fixtures
  Jigs and supports can be attached to the table to accurately hold parts

• Blade Lubrication and Coolant
  Liquid oil emulsion is used to cool and lubricated the cutting blade increasing blade life. Option: Air/Oil Spray

• Zero Adjust Vice Height
  Vice closure is sensed by the positive closing of the clamp. The operator does not need to alter the clamp setting when changing job. Clamp force control can be controlled by specifying 'Vice Force Control' option

• Small footprint
  Less room used on the factory floor